Dryer Vent Fires Top 10 Reasons Daytona Beach Home Fires!

Not Cleaning the Clothes Dryer and Duct is the Major Cause of Dryer Fires!

Modern home appliances are safer today than they were just a decade ago, but the amount of fires has not decreased. Failure to clean the dryer and ducts accounts for more than 34 percent of the dryer fires in the United States. This is the leading cause of home clothes dryer fires. Other causes include manufacturing defects and poor installation. Foreign manufacturing and foreign component suppliers are another cause. Increasing quality issues are associated with the extremely rapid growth of fires connected with appliances. More home clothes dryer fires occur in the fall and winter months and peak in January. 

 

You should check your dryers and appliances out for manufacturer defects and recalls at https://www.cpsc.gov/Recalls .

 

What Type of Dryer is Your Home Designed for?

The dryer manufacturers set limits of the length and type of duct that can be used with their dryers. These limits are based on the type of equipment installed in the dryer. Damp lint requires a certain volume of air to move it through the ducts. Homeowners will often select a dryer and make it fit their house. Some dryers are designed with larger motors and fans to move the lint farther.  Economy or inexpensive dryers often have the smallest motors and fans. All dryers are not created equal.  

 

Duct Design Limits The Length and Orientation.

The type of duct material, vent hood, the number of turns the duct and orientation, horizontal or vertical affect the length of the duct.  Below is the dryer manufacturers' requirement based on the model of dryer.

If your dryer is not listed consult your owners manual or look it up online.

Ducts should have no mechanical fasteners.

The type of material used for the duct is very important in venting lint and moisture. Each 90-degree turn decreases the length of the duct by 5 feet. The use of a flat hood decreases the length by half. Using flexible vent ducts also cuts the length by half.  Rigid metal ducts are required to be taped at the joints and not fastened by screws.  The screw shank protruding into the duct creates and place for lint to accumulate.

 

Flexible and vinyl ducts are not allowed

because they collect lint and are a fire hazard!

Homeowners often choose flexible metal or vinyl duct for their ease of installation. These types of ducts are not allowed for use on a dryer in many areas due to the fire hazard. Flexible ducts have many areas for lint to accumulate within the duct. Vinyl and PVC when heated create an electrostatic charge that attracts lint, these are not allowed.  Most municipalities and building codes require rigid metal ducts without mechanical fasteners. These rigid ducts have fewer areas to collect lint and obstruct the airflow.

 

Clogged gooseneck dryer vent on the roof.

Gooseneck dryer vent hoods are often clogged due to the location on the roof. The homeowners are either unaware of them or just forget about them until they become a problem. Most of these types of vents we inspect are clogged. Many of these types of vent hoods when clogged cause the duct to separate in the attic. Damaged ducts pump moisture and lint into the attic causing moisture damage, wood rot and mold growth. Gooseneck hoods because of their location on the roof should be scheduled for yearly inspection and cleaning by a professional. 

 

 

 

Annual Dryer Duct Inspection and Cleaning

All dryer ducts should be inspected and cleaned yearly. Check with your Home Inspector when you buy your home. A dryer duct inspection may reveal improper installation or materials. If you have a larger family and use the dryer daily or more often, your ducts may require semi-annual cleaning. Less frequent use may only require biennial cleaning.  Protect your family and sleep soundly at night.  Have your ducts inspected and cleaned in the fall when you change your smoke detector batteries. 

Frank Carr, Florida Licensed Home
Inspector

Frank Carr is the Owner / Inspector at First Choice Home Inspections in Deltona, FL serving Volusia, Seminole, Orange and Lake Counties. Formerly in the building trades, Frank’s focus is a safe home in the Orlando Metro and Daytona Beach areas of Central Florida and building FCHI. We believe that consumers have the right to expect the highest standards of thoroughness, fairness and effectiveness from their home inspector and that is exactly what we provide.
 

First Choice Home Inspections

Residential Home Inspections in Central Florida

(386) 624-3893 

Website:  http://1homeinspector.com

Facebook:  https://www.facebook.com/FirstChoiceHomeInspectionsLlc

LinkedIn:  https://www.linkedin.com/company/first-choice-home-inspections

Google+:  https://plus.google.com/+FirstChoiceHomeInspectionsDeltona

Twitter: https://twitter.com/1stChoiceHomeIn

 

Radiant Barriers Save Daytona Beach Homeowners Money

What is a Radiant Barrier? Are they effective at reducing my energy bill?

We inspect a lot of hot dusty attics, some are 165° F. We see all kinds of situations where attic insulation is insufficient, ventilation is inadequate, and rarely find radiant barriers installed in attics. According to the Department of Energy Radiant Barriers work best in hot climates when used in conjunction with sufficient insulation and ventilation. Studies show that radiant barriers can reduce cooling costs 5% to 10%. The reduced heat gain may even allow for a smaller air conditioning system or improve effectiveness of an under rated systems.

Radiant barriers are installed in homes primarily to reduce summer heat gain and reduce cooling costs. Radiant barriers do not reduce heat conduction like thermal insulation materials. The barriers are comprised of a highly reflective substrate or foil that reflects radiant heat rather than absorbing it.

Heat Transfer

Like a cool spoon in cup of coffee conducts heat through its handle to your hand; heat travels from a warm area to a cool area by a combination of conduction, convection, and radiation. Heat flows by conduction from a hotter location within a material or assembly to a colder location. Heat transfer by convection occurs when a liquid or air, becomes lighter and rises. When liquid or air cools, it becomes heavier and falls. Radiant heat moves from hots surfaces and is absorbed by cooler materials or air. A car parked in the sun will absorb the radiant heat into the cars finish and transfer the heat thru the metal into the interior where it heats the air inside the car.

How Radiant Barriers Function

Most insulation materials work by slowing heat transfer. Radiant barriers and reflective insulation systems are designed to reduce the transfer radiant heat. Radiant barriers must have an air space to work. Radiant barrier are less effective when installed horizontally. Dust accumulation on the reflective surface reduces its reflective properties.

As the sun heats your roof, it makes your roof hot. The heat travels through the roofing materials to the attic side of your roof. It radiates the increased heat energy onto the cooler attic materials, the air conditioning ductwork and the ceiling of your home. A radiant barrier reduces the radiant heat transfer from the underside of the roof to the other surfaces in the attic.

Radiant Barriers help air conditioners cooling capacity

Radiant barriers are more effective in hot climates than in cool climates, especially when cooling air ducts are located in the attic. Some studies show that radiant barriers can reduce cooling costs 5% to 10% when used in a warm, sunny climate. The reduced heat gain may even allow for a smaller air conditioning system. In cool climates, however, it's usually more cost-effective to install more thermal insulation than to add a radiant barrier.

Frank Carr is the Owner / Inspector at First Choice Home Inspections in Deltona, FL serving Volusia, Seminole, Orange and Lake Counties. Formerly in the building trades, Frank’s focus is a safe home in the Orlando Metro and Daytona Beach areas of Central Florida and building FCHI. We believe that consumers have the right to expect the highest standards of thoroughness, fairness and effectiveness from their home inspector and that is exactly what we provide.
 

First Choice Home Inspections

Residential Home Inspections in Central Florida

(386) 624-3893 

Website:  http://1homeinspector.com

Facebook:  https://www.facebook.com/FirstChoiceHomeInspectionsLlc

LinkedIn:  https://www.linkedin.com/company/first-choice-home-inspections

Google+:  https://plus.google.com/+FirstChoiceHomeInspectionsDeltona

Twitter: https://twitter.com/1stChoiceHomeIn

Daytona Beach Air Quality, Sealing Your Building Envelope

Why is my Electric Bill so HIGH?

The most cost-effective way to cut heating and cooling costs, increase stability, improve comfort levels, and create a healthier interior atmosphere is to reduce the amount of air that flows in and out of your home. A Daytona Beach home inspector can perform a home inspection and identify probable causes.  Before considering improving insulation or installing a vapor barrier, you should take care of those drafty utility penetrations, windows and doors. Weather stripping and caulking around doors, windows and utility penetrations are two simple and effective techniques for air-sealing that offer quick returns on investment. Weather stripping is used to seal components that move, such as entry and garage doors and operable windows. Weather strips take a lot of abuse and wear out frequently over a home’s lifetime, check them quarterly and replace as needed. Caulking (interior and exterior) is generally used for cracks and openings between stationary house components like; doors, windows, masonry cracks and ledges, utility penetrations any trim or siding joints.

Air Leakage

Air leakage occurs when outside air enters and conditioned air leaves your house uncontrollably through cracks and openings. When it is cold or gusty, an excessive amount of air may enter the house. During summer or warmer weather, conditioned air exits the building envelope, which can result in poor indoor air quality. Air leakage also causes moisture problems that affect the structure’s durability and the occupants’ health. Condensation is a major contributing factor to wood rot in most homes. An added benefit is that sealing cracks and openings decrease drafts, cold spots, and improves comfort. It is important to seal the fire barrier between the home and garage to reduce the chances of carbon monoxide poisoning. Never rely on air leakage for ventilation.

Detecting Air Leaks

The best way to reduce air leakage and controlled ventilation is to have a home energy audit performed on your home. The test, when performed by a licensed professional, will identify air leaks, air quality and if additional ventilation is needed. Before sealing air leaks, assess your ventilation needs for indoor air quality.

If you are planning an extensive renovation of your home, review techniques used for air sealing in new home construction and consider a home energy audit to identify all the ways your home costs you money by wasting energy. To seal air leaks, apply air sealing techniques and materials, including caulk and weather stripping.

How to Seal Air Leaks

Common places air leaks are found:

• Check the weather stripping on doors and windows.
• Check caulking on doors and windows. Old, dried and cracked caulking should be removed and replaced. There are many types of caulking for many different applications. You should know what type of caulk you should use before sealing those leaking windows.
• Check caulking where utility penetrations come thru exterior walls. Check plumbing, ducts, electrical wiring, cable TV and telephone cables comes through the floors, exterior walls, ceilings, and soffits.
• Install foam gaskets on electrical outlets and switches on perimeter walls.
• Dirty spots on insulation may be an indication of air leaks and mold. Look for leaks and seal with low-expansion spray foam. Large gaps may require the installation of flashing.
• Dirty spots on your walls, often around electrical receptacles and switches, or ceilings by vents or light fixtures, may indicate air leaks. Use foam gaskets or spray foam to seal leaks.
• Single-pane windows allow hot and cold air to transfer. Double-pane low-emissivity windows are more efficient and the cost to upgrade will be recouped in energy saving over a few years.
• Use foam sealant on larger gaps around windows, baseboards, and other places where air may leak out.
• Check your kitchen exhaust fan for air leaks. Stop air leaks by upgrading the exhaust fan or cover the vent to stop air leaks when not in use.
• Check your dryer vent to be sure it is not blocked. Lint will keep the dryer vent door from closing allowing air to leak in and out of your home. This will save energy and may prevent a fire.
• Check the bottom door sweep and threshold for pliability and damage. Replace damaged seals with energy efficient pliable sealing gaskets.

Fireplace Flues, Dampers and Chimneys

Fireplaces are a major source of air outflow. Keep the fireplace flue damper tightly closed when not in use.

• Seal air leaks around fireplace chimneys, furnaces, and gas-fired water heater vents with fire-resistant materials such as sheet metal or Sheetrock and furnace cement caulk.
• Check your makeup air vent damper to ensure it seals properly.

Fireplace flue damper doors are made from metal, constant heating and cooling can cause the doors to warp, crack or break, creating a passage for air loss.

One way to seal your flue when not in operation is an inflatable chimney balloon. A chimney balloon is made of durable plastic and can be reused many times. It installs easily beneath your fireplace flue and can be removed easily. The balloon will automatically deflate within seconds if it becomes heated, if you forget to remove the balloon before making a fire. Balloons are available in various sizes online and in retail shops.

Sealing air leaks will not eliminate the need for proper insulation or radiant barriers that reduce heat flow through a home’s building envelope.

Frank Carr is the Owner / Inspector at First Choice Home Inspections in Deltona, FL serving Volusia, Seminole, Orange and Lake Counties. Formerly in the building trades, Frank’s focus is a safe home in the Orlando Metro and Daytona Beach areas of Central Florida and building FCHI. We believe that consumers have the right to expect the highest standards of thoroughness, fairness and effectiveness from their home inspector and that is exactly what we provide.
 

First Choice Home Inspections

Residential Home Inspections in Central Florida

(386) 624-3893 

Website:  http://1homeinspector.com

Facebook:  https://www.facebook.com/FirstChoiceHomeInspectionsLlc

LinkedIn:  https://www.linkedin.com/company/first-choice-home-inspections

Google+:  https://plus.google.com/+FirstChoiceHomeInspectionsDeltona

Twitter: https://twitter.com/1stChoiceHomeIn

Fireplaces, Furnaces and Heater Home Safety in Daytona Beach

It is approaching that time of year again, when we will be firing up our heaters, fire places and furnaces.  Have you had your annual maintenance checkup or your fireplace chimney inspected and cleaned?  These are important things to consider, but did you forget to check your batteries in your smoke and CO alarms.  Most homes have smoke alarms (detectors); more than 33 percent of these homes are not protected because the smoke alarms don’t work.  When a smoke alarm fails to work, it is frequently because the batteries are missing. People often remove or disconnect batteries to prevent nuisance activation caused by bathroom steam or cooking vapors.  Was your smoke alarm on a recall list?

Smoke and Fire

Most fire deaths occur in the middle of the night.   No smoke alarms were present or they did not operate in nearly 75% of residences where a fire fatality occurred, according to FEMA statistics.  A smoke alarm is the most valuable life saving device you can have in your home.  An operable smoke alarm will reduce your chances of dying in a fire, nearly in half.  Smoke alarms are designed to detect and warn that silent, but deadly smoke is in the air. The early warning will wake you and your family, allowing time to escape your burning home.

At 40 percent, cooking is the leading cause of residential structure fires. Heating causes another 14 percent. These percentages (and those that follow) are adjusted, which proportionally spreads the unknown causes over the other 15 causes.

The two leading causes of residential fatal fires are smoking, at 18 percent, and other unintentional or careless actions, at 14 percent. The leading cause of residential fires that result in injuries is cooking (26 percent), followed by other unintentional or careless actions (11 percent) and open flame (also 11 percent). Cooking is, by far, the leading cause of fires with property loss, at 20 percent.¹

¹  U.S. Fire Administration/National Fire Data Center, Fire in the United States 2003-2007 Fifteenth Edition

Carbon Monoxide

People are at an increased risk of carbon monoxide poisoning during the winter months. Well-insulated, airtight homes and malfunctioning heating equipment can produce dangerously high and potentially deadly concentrations of carbon monoxide.

Carbon monoxide is a by-product of incomplete combustion, any fuel-burning appliance, vehicle or tool that is inadequately vented or maintained can be a potential source of carbon monoxide gas.

Examples of fuel- burning equipment include: 

• Fuel - furnaces and space heaters. 
• Propane or Gas - fireplaces, (both vented and ventless), space heaters, ranges and ovens, clothes dryers, grills, smokers, and deep fryers.
• Wood burning fireplaces and stoves 
• Charcoal grills and smokers 
• Gasoline – automobiles, lawnmowers and power tools

Gas fireplaces are gaining in popularity based on their low cost, convenience and relative ease of installation.  Ventless or vent free gas fireplaces are not vented to pipes or chimneys. The burned gases including carbon monoxide are put into the circulation of the air within your home.  Based upon the health risks associated with the use of ventless gas fireplaces, their installation is illegal in many areas of the country.

Prevent or minimize the potential for exposure to carbon monoxide gas. 

• Have your home-heating systems, fuel-burning appliances, flues and chimneys inspected, cleaned or schedule an annual home checkup by a qualified home inspector. 
• Make regular visual inspections of fuel-burning appliances such as your gas dryer and hot water heater. 
• Do not burn charcoal inside a home, cabin or camper.
• Do not operate gasoline-powered engines (generators, cutting saws) in confined areas such as garages or basements. 
• Do not idle your car inside the garage. 
• After a hurricane or storm, make sure vents for the gas dryer, furnace, stove and fireplace are clear of debris and intact. 
• Never use gas ovens and ranges to heat your home!

Check your Smoke and CO alarms frequently.  Smoke alarms are set off by bathroom steam or cooking vapors. Rather than take the battery out of your alarm, do the following: 

• Quiet the alarm by pushing the “HUSH” button, if equipped. 
• Open windows and turn on vent fans to clear the air.
• Consider relocating the alarm farther away from the cooking area or bathroom.
• Consider installing a photoelectric or combination photoelectric/ ionization type alarm. The photoelectric and combination type alarms are less sensitive to cooking smoke.

Causes of Christmas Fires

Cooking, heating, and open flames are the major cause of Christmas fires, according to the US Fire Administration.  This is not surprising due to holiday cooking and the more prevalent use of home fireplaces, displays, and decorations involving candles.  The daily incidence of candle−started fires quadruples on Christmas Day.

Opinions of a Home Inspector

Christmas is the time to spend with your family and friends, not to worry and agonize if you will have a fire.  Every Christmas the sounds of fire engine sirens overpower my family’s holiday music.   We often worry if the sirens are for one of our friends or neighbors in Daytona.  You should have all your heating and cooking equipment inspected and serviced before your family arrives.  Fireplaces should be inspected yearly and cleaned regularly.  Be aware of the placement of candles and decorations.  Make sure you give your live Christmas tree plenty of water and keep it away from candles and fire places.  May your Christmas be worry free and full of holiday cheer.

Frank Carr is the Owner / Inspector at First Choice Home Inspections in Deltona, FL serving Volusia, Seminole, Orange and Lake Counties. Formerly in the building trades, Frank’s focus is a safe home in the Orlando Metro and Daytona Beach areas of Central Florida and building FCHI. We believe that consumers have the right to expect the highest standards of thoroughness, fairness and effectiveness from their home inspector and that is exactly what we provide.
 

First Choice Home Inspections

Residential Home Inspections in Central Florida

(386) 624-3893 

Website:  http://1homeinspector.com

Facebook:  https://www.facebook.com/FirstChoiceHomeInspectionsLlc

LinkedIn:  https://www.linkedin.com/company/first-choice-home-inspections

Google+:  https://plus.google.com/+FirstChoiceHomeInspectionsDeltona

Twitter: https://twitter.com/1stChoiceHomeIn